10 Mesh strips per pack. NEXMESH EXTREME (A1 0.16OHM) nexMESH Extreme is the refined woven wire mesh derived from the original wire mesh. Its secret resides in the accurate usage of wires. Flavor production can vary drastically with tiny little difference in mesh patterns including the weaving, the crimping, the spacing and the wire. To further help understand what power nexMESH Extreme has, we’ll use an analogy: nexMESH Extreme is...
The HorizonTech Sector vape coils have been designed as a replacement coil for the HorizonTech Falcon 2 vape tank. Created for sub ohm vaping, they’ll produce large amounts of vapour. To support sub ohm vaping, we recommend using the Sector coils with a high VG e-liquid. Features: HorizonTech sub ohm coils 0.16 Ohm resistance Mesh coil builds Works best at 75W Compatible with high VG e-liquids The benefit of...
Aegis / Cerberus / Shield / Aero Replacement Coils These Geekvape replacement coils are designed for use in various Geekvape tanks, including Shield / Aero / Aero mesh / Cerberus subohm Tank (as found on the Aegis Mini Kit) These coils are available in the following variants; 0.4ohm IM1, 0.15ohm IM4, 0.2ohm Mesh and 0.3ohm Super mesh X2 Sold in packs of five coils
Each replacement pod comes with a pre-installed 0.8 ohm mesh coil and its own top cap, so no leaks in your pocket or purse.
The NXT features a totally new concept for Aspire coils, exclusive to the Breeze NXT, a 'push fit' mesh coil with superior wicking capabilities. Sold in packs of three
Mulus E-Liquid Pod The replaceable Mulus pod features a convenient leak free, side fill design. Please note: This pod does not contain a coil
Uwell Crown IV Replacement Coils use the highest quality SS904L stainless steel and organic cotton. Available in three resistances of 0.2ohm, 0.4ohm and 0.23ohm Mesh. Sold in packs of 4coils
Valyrian II Coils The new Uwell Valyrian 2 tank has multiple coil options available Single Mesh 0.32 Ω = 90-100 WDual Mesh 0.14 Ω = 80-90WTriple Mesh 0.16 Ω = 90-100WQuadruple 0.15 Ω = 100-120 W
OBS Cube Coils OBS Cube coils come in two versions, M1 Mesh and the new M3 Mesh. These OBS coils are designed for use in the OBS Cube and OBS Cube X kits as pictured below
Cube Mini Coils The OBS Cube Mini Kit has two coil options. S1 Mesh is a mesh constructed, 0.6ohm coil which is designed for low nicotine content e-liquid. N1 is a traditional style coil with a 1.2ohm resistance and is designed for use with higher nicotine containing E-Liquid or Nicotine Salt E-Liquid
ORCHID POD KIT REPLACEMENT PODS (PACK OF 2) VERSION 2 Orchid Pod Kit replacement pods are designed to work with the Orchid Pod Kit. Featuring a 0.8ohm mesh coil providing exceptional flavour and great vapour production. The top side fill method making it uncomplicated yet functional to refill with no leakage. Available in both Black and Clear colours. CONTENTS: 1 x 2 Replacement Pod Cartridge (2ml capacity)
TX2 Mesh Coil from Freemax is compatible with the Freemax Twister Kit and Freemax Fireluke 2 Tank. It features a Kanthal double coil head with 0.2ohm resistance and is best between 40-80W. TX3 Mesh Coil from Freemax is compatible with the Freemax Twister Kit and Freemax Fireluke 2 Tank. It features a Kanthal triple coil head with 0.15ohm resistance and is best between 50-90W.
The Innokin Slipstream System Replacement Coil Family pairs with the great tasting Pocketmod All-in-One Ultra Portable System. The Slipstream System atomizer coils are made specifically for vapers who seek mouth-to-lung or direct lung hits. Pack of 5 0.35Ω Coils (20-40W)
Replacement 1.5ohm coils for the Innokin Endura T20 / Prism T20 tank.These coils are not suitable for the T18, T18E or T22 tanks Sold in packs of five
Replacement coils for the Innokin Endura T20S tank as found on the EZ Watt Kit 0.8ohm coils have a wattage rating between 16-18w1.5ohm coils have a wattage rating between 13-14wThese coils are not suitable for the T18, T18E or T20 or T22 tanks Pack of 5 coils.
Replacement coils for the Innokin Zenith, Zlide and Z-BIIP ranges These tanks and kits uses four different coils designed to tailor your vaping experience. The 1.2 Ohm Kanthal coil is designed for a cooler vape at lower wattages between 10w to 14w. The 0.8 Ohm Kanthal coil is more suited at those looking for a slightly warmer vape and slightly higher wattages with a more powerful...
Replacement coils for use in the Innokin Jem range of starter kits. Each coil is 1.6ohm with a recommended wattage range of 10w to 13.5w Sold in packs of 5 coils
SKRR Coils Sold in packs of three
PNP Coils Voopoo PnP Coils are compatible with the VINCI, FIND Trio, FINIC P18 & DRAG Baby Trio Kits
Coil for use in the Aspire Cleito EXO tank. Designed for power levels between 60-100w Pack of 5 coils.
Replacement pod for use in the Aspire AIO Nautilus Kit. Ideal for keeping different flavoured e-liquids on the go! Aspire Nautilus AIO Filling Coil Installation
The Athos tank has two coil options, both made made for flavour and for power. These new coils will satisfy every cloud or flavour chaser! The Tri coil head is a 0.3 ohm coil and the recommended power range is 60-75 watts. For those wanting higher vapour production, Aspire recommend the new Penta coil which is a five coil in one head option, rated at 0.16 ohms with a with a recommended power range of...
Aspire Tigon Coils – 1.2ohm / 0.4ohm These push-fit coils are designed for use with the Aspire Tigon tank and are constructed from high-grade nichrome wire for a smooth, even and thoroughly-satisfying vape. Two coil options each offer a different vaping experience and allow you to tailor your kit to reflect your personal preferences. A 1.2ohm coil is perfect for mouth-to-lung vaping and performs especially well when paired with...
Aspire Cleito Pro Mesh Coils 5 x Aspire Cleito Pro replacements coils (0.15 Ohm Pro mesh coils or 0.5 Ohm Pro Standard coils): Aspire Cleito Pro Mesh Coils have been designed specifically for the new Aspire Cleito Pro tank but are compatible with the Cleito tank range too. We offer both the standard and the Cleito Pro Mesh coil options. These coils are designed for maximum flavour and vapour production by replacing the...